During the second simulation, I found it helpful to first brainstorm all the things we thought could be the problem. From there, we were able to evalu...

In the executing process, I think the most important consideration for a project manager is to have strong communication both within their project tea...

I would think that the planning process is just as important as the mentioned parts of the executing process. Without adequate planning, there would b...

I think poor communication would be a major reason for a project to fail. Communication is necessary during all aspects of the project, and without it...

In dealing with failures, I think the first step is to list out every aspect that may be causing the failure. From there, the aspects can be prioritiz...

I think the engineers and manufacturing individuals should be included in developing the design inputs. These individuals would be able to best ensure...

On a previous project to create a protective device for children, the customer wanted the device to look aesthetic or socially acceptable so that chil...

I believe having parallel and overlapping tasks can lead to an earlier completion of a project. The Gantt chart allows a project team to determine whi...

I believe it is a rigid rule that verification takes place during the execution phase of a project. Since verification is done to ensure design output...

I do not have industry experience, however, during my senior capstone design project, we created a work breakdown schedule for our project. During the...

During my capstone senior design project, my advisor explained the difference between verification and validation as verification is performance testi...

I previously interned at a small, additive manufacturing start up company. Due to the size, the project team generally included everyone in the compan...

I believe the planning phase of the project cycle. Although the initiating phase first introduces the project, the planning phase lays out the specifi...

If this was a project in industry, I believe the initial meeting and planning of how to address the challenges presented would have been very similar....

I previously had an internship with an additive manufacturing company with a project-based organization. For this company, I believe it was the best o...